Minors under the age of 21 are prohibited from purchasing.
As the part of the vape puff e-cigarette mouthpiece that is in direct contact with the mouth, it is easy to accumulate stains, grease and residual smoke liquid after using for a while, which not only affects the aesthetics, but also may harbour bacteria. The following are several effective ways to clean the electronic cigarette mouthpiece stains:
First, basic cleaning: suitable for daily light stains
Warm water rinsing
Remove the mouthpiece and rinse it with flowing warm water (about 40℃) to remove loose stains and residual tobacco liquid on the surface.
Avoid using hot water as it may damage the material of the mouthpiece (e.g. plastic or silicone).
Soft Bristle Brush Aid
Use a soft-bristled toothbrush or special cleaning brush to gently brush the inside and surface of the mouthpiece.
Focus on areas where stains tend to accumulate, such as the connection between the mouthpiece and the atomiser and the mouthpiece opening.
Second, deep cleaning: for stubborn stains and grease
Alcohol wipe method
Use 75% medical alcohol, dip a small amount on a cotton swab or soft cloth and gently wipe the surface and interior of the mouthpiece. reference to EU Ecolabel
Alcohol is effective in dissolving grease and stains, and also has antiseptic properties.
After wiping, rinse with water and air dry.
Baking soda + warm water soak
Add appropriate amount of baking soda (about 1 teaspoon) to warm water and stir well.
Soak the bong in the baking soda solution for 10-15 minutes, then gently brush it with a soft-bristle brush.
Baking soda has stain removing and deodorising effects and is suitable for removing stubborn stains.
White Vinegar Soaking Method
Soak the bong in white vinegar for 10-15 minutes. The acidity of white vinegar can break down grease and stains.
After soaking, rinse with water and dry with a soft cloth.
Note: White vinegar may be slightly corrosive to some materials (e.g. metal), so it is recommended to test it in an inconspicuous place first.
Third, vape puff special material cleaning
Metal Pipe
Avoid using acidic cleaners (such as white vinegar) to avoid corrosion of the metal surface.
You can use metal special cleaner or toothpaste (without particles) to gently wipe.
Silicone Pipe
Silicone is a soft material that attracts stains easily, so it is recommended to use a mild detergent (e.g. baby shampoo) to clean it.
Avoid scratching with sharp tools to avoid damaging the surface.
Glass Pipe
Glass bongs are easy to clean and can be wiped with alcohol pads or glass cleaner.
Avoid violent collision to prevent rupture.
Fourth, vape puff Precautions
Regular cleaning: It is recommended to clean the mouthpiece once a week to avoid the accumulation of stains.
Avoid high temperature: Avoid using high temperature water or drying equipment when cleaning to avoid damaging the material.
Dry thoroughly: Be sure to dry the mouthpiece after cleaning to prevent bacteria from remaining moisture.
Replace the cartridge: If the mouthpiece has a built-in cartridge, it is recommended to replace it regularly (usually every 1-2 weeks) to ensure the taste and hygiene.
Fifth, vape puff cleaning tools recommended
Soft bristle toothbrush or special cleaning brush
Cotton swabs (for cleaning tiny parts)
Alcohol cotton pads (for quick sterilisation)
Disposable gloves (to avoid hand contact with cleaning agents)
Through the above methods, you can effectively remove the stains of e-cigarette mouthpiece, prolong the service life, and at the same time protect the use of hygiene. If the stains are too stubborn or the material of the mouthpiece is special, it is recommended to consult the electronic cigarette brand official or professional maintenance personnel.
